The importance of cosmetic packaging materials in the cosmetic processing and production process is self-evident. The quality of cosmetic packaging materials will also have a very important impact on the cosmetic processing and production process. Therefore, purchasing cosmetic packaging materials and doing a good job in the quality control of cosmetic packaging materials are important The necessary conditions for the smooth processing and production of cosmetics are also an indispensable link to ensure the quality of customer brand products.
 
Cosmetic packaging materials are divided into inner packaging materials and outer packaging materials, and can also be divided into soft packaging and hard packaging. Because the quality of packaging materials directly determines the brand image of the product, we hereby integrate the needs of different packaging materials purchasing users for packaging materials. With the standard, talk about the basic quality requirements of cosmetic packaging materials in cosmetic processing, for your reference:
 
First, basic requirements for containers and packaging materials for containers
1. Bottle
The bottle body should be stable, the surface is smooth, the thickness of the bottle wall is basically uniform, there is no obvious scar, deformation, and there should be no cold explosion and crack. The mouth of the bottle should be straight and smooth, without burrs (burrs), and the matching structure of the thread and bayonet should be intact and correct. The cooperation between the bottle and the cap should be tight, there is no slippage, looseness, and no leakage. The inside and outside of the bottle should be clean.
2. Hose
The body of the hose should be smooth, tidy, uniform in thickness, without obvious scratches, and the color should be uniform. The sealing of the hose should be firm and correct, and there should be no openings and wrinkles (except for the normal indentation of the mold). The composite membrane of the hose should not float.
3. Cover
Inner cover: The inner cover should be complete, smooth, clean and not deformed. The inner cap should fit well with the bottle and outer cap. The inner cover should not be leaked.
Outer cover: The outer cover should be straight, smooth, free from cracks, cracks, burrs (burrs). The color of the outer cover should be uniform. The thread matching structure of the outer cover should be intact.
The color of the outer cover with anodized aluminum or hot stamping should be uniform. The flip cover should be flipped up flexibly, and the connection part should not be broken. The cap and the bottle should be tightly matched without slipping or loosening.
4. Spray cans
The tank body should be flat, no rust spots, smooth welding seam, no obvious scratches or concave tank phenomenon, and the color should be uniform. The roll mouth of the spray can should be smooth and should not be wrinkled, cracked and deformed. The cover of the spray can shall meet the requirements of 5.3.2.
5. Nozzle
The nozzle should be straight, clean and free of damage and cracks. The assembly parts of the nozzle should be complete to ensure smooth spray night.
 
Second, the basic quality requirements of flexible packaging
1. bag
Bags should not be significantly wrinkled, scratched, air bubbles. The color of the bag should be uniform. The sealing of the bag should be firm, and there should be no opening, perforation, or leakage (paste). The compound bag should be firmly compounded and coated evenly.
2. Plastic packaging
The plastic seal should be firmly bonded without cracking. The plastic sealing surface should be clean and free of damage. There is no wrong installation, missing installation or flipping phenomenon in the plastic package.
 
Third, the basic quality requirements of cosmetic packaging materials
1. Ingot tube
The tube body of the ingot tube should be straight and smooth, without cracks, burrs (burrs), without obvious scratches, and the color should be uniform. The components of the ingot tube should be tightly matched to ensure that the contents can be screwed out or pushed out normally.
2. Makeup pen
The barrel and cover of the cosmetic pen should be smooth and upright, with no glue opening and no cracking of the paint film. The fit between the barrel and the cover of the cosmetic pen should be tight and appropriate. The color of the pencil should be uniform.
 
Fourth, the basic quality requirements of outer packaging
1. Color box
The surface of the color box should be smooth and correct, and there should be no obvious scratches, burrs (burrs), serious collapse and damage. The opening tightness of the box should be appropriate. When taking out the flower box, do not force it with fingers to hold the edge of the cover, and the bottom does not fall off by itself. The mirror surface, contents and the box in the box should be firmly attached, the mirror surface should have a good image, and there should be no scratches and damages on the bottom.
2. Printing and labeling
The pattern and handwriting printed on cosmetic packaging materials should be neat, clear, not easy to fall off, and uniform in color. The labels of cosmetic packaging should not be wrongly posted, missed or reversed, and should be firmly pasted. Label requirements are in accordance with the provisions of GB 5296.3.
3. flower box
The flower box should be tightly matched with the middle box packaging. The flower box should be clean, straight and flat, with the lid well covered, without wrinkles, missing edges and corners. The adhesive parts of the flower box should be firmly pasted, and there should be no sticking marks, cracking and mutual adhesion. There is no wrong installation, missing installation or flipping phenomenon of the product.
4. Middle box
The middle box should be tightly matched with the flower box packaging. The middle box should be clean, straight and flat, and the box cover should be closed. The adhesive parts of the middle box should be firmly pasted, and there should be no sticking marks, cracks and mutual adhesion. There is no wrong installation, missing installation or flipping phenomenon of the product. The label of the middle box should be correct, clean and complete, and should indicate the product name, specification, number of boxes and the name of the manufacturer as needed.
 
Fifth, the basic quality requirements of transportation packaging
Transport packaging should be neat, correct, smooth, and tightly sealed. There is no wrong installation, missing installation or flipping phenomenon of the product. The signs of the transport package should be clear, complete, and in a suitable location, and if necessary, the product name, manufacturer's name and address, net content, product quantity, FCL mass (gross weight), volume, production date and shelf life or production batch number and expiration date should be marked Date of use.